Skip to content

Training course: Asset Management, Maintenance and Remaining Life of MV and (E)HV Power Cables

Training course that deals with the asset management, maintenance, condition and the remaining life of MV and (E)HV power cables.

Your benefits

This course will help you and provide you with:
■ Focus on points of reference for efficiently dealing with cables and accessories
■ Determine the right asset management strategy
■ Define the appropriate maintenance activities in cope with degradation mechanisms
■ Estimate the remaining life span in order to determine and justify the correct resulting actions
■ Gather knowledge required to reduce maintenance costs and the number of fault, while increasing the total life
■ Points of reference for efficiently dealing with cables and accessories
■ Insight into which form of maintenance to apply and when
■ Insight into which maintenance strategy can be best applied
■ Knowledge required to reduce maintenance costs and the number of faults, while increasing the total life

For whom?

Anyone involved (or to be involved) with power cables in the course of their daily work. It is recommended that the participants hold at least a Bachelor of Engineering degree or have a certain foreknowledge of power cables. 

The Power cables in general course is a recommended preparation, but not a requirement.

Course topics

The following topics will be addressed:

  • Asset management:
    - ageing of cables and accessories 
    - diagnostic measurements
    - Maintenance types and their application
  • What is asset management? What are the main factors that cause cables and accessories to age and degrade? How do these factors show themselves in practical examples and what is their relevance?  What are relevant differences between cables types and voltages classes? How does this relate to the application of diagnostics? What are relevant observations in cable maintenance practices, what types of maintenance apply and what are the trends?
  • Determining the remaining lifespan of MV & (E)HV power cable systems:
    - DNV method for MV cable systems
    - CIGRE method for (E)HV cable systems
    - DNV method for (E)HV cable systems
  • What are the methodologies and references available for assessing the remaining life of a power cable system? What methods can be applied for medium- high- and extra high voltage cable systems. What are the experiences and trends?
  • Asset management
    Maintenance, diagnostics and replacement are key tools for determining or influencing the remaining life.
    Sound asset management strategy is indispensable in this respect and can help find a proper balance between cost savings and reliability, for example. Numerous practical cases are dealt with in this course with a focus on ensuring that maintenance on a particular cable type is properly carried out. The supporting process, with reference to international standards such as ISO55k, is also discussed.
  • Cable types and accessories
    A short overview will be provided of the most common cable types, components and accessories of MV and HV systems.
  • Types of faults
    Many common defects are addressed, often with examples, such as: penetration of moisture in oil joints, degradation of resin joints, carbonization in earthing joints, water trees in an XLPE cable and drying out of PILC cable.
  • Ageing processes
    In terms of degradation, many types of defects can be grouped into a number of generally know processes, such as partial discharge, electric tree formation, water trees, etc. These processes largely affect the remaining life.
  • Diagnostic methods
    A number of ageing processes can be made visible by means of diagnostic methods. Partial discharges can be measured and localized using solid PD measurement technologies and the associated analysis methods.
    Such more advanced forms of ‘predictive maintenance’ are discussed, along with less advanced techniques, determining their role in potential cost and risk mitigation procedures. These diagnostic methods are explained here and their value in determining the remaining life of a power cable system is discussed as well.
  • Remaining life of MV cables
    The course deals with a DNV proprietary method designed to determine the remaining life of a power cable system. What data is required and how can this data be obtained?
    Various examples showing how to calculate the remaining life will be discussed. This will also include a discussion of the possibility of influencing the remaining life or preventing failure of the cable system by means of maintenance.
  • Remaining life of (E)HV cables
    Both a DNV proprietary and CIGRE developed methodology will be discussed. The CIGRE method is based on questionnaires that weigh several technical, economical and strategical criteria. The course covers a number of practical cases to which this methodology is applied. The same is done for the DNV proprietary model, which is based on three pillars: statistical data analysis, utilization (load) data analysis and factoring in diagnostic condition indicators.

    To ensure that course participants will be able to sufficiently master the subject matter, time has been allocated for completing a number of exercises. This will also include a discussion of the possibility of influencing the remaining life or preventing failure of the cable system by means of maintenance.

Practical information

For the following items, please refer to the registration form:

  • Course dates
  • Venue details
  • Registration fee
  • Payment and cancellation conditions

The training and all course materials will be in English. To encourage active participation, the number of participants is limited to 20. Click here for more information and to register for the upcoming course.


In-company and customized training courses

On request, DNV can also develop customized and in-company training courses in English or Dutch. Content, location and duration of the course can be adapted to your specific needs.


For more information please contact us

Energy Academy
email: academy.energy@dnv.com
web: www.dnv.com/energy-academy
tel: +31 (0)6 29602659 / +31 (0)6 15063593 / +31 (0)6 18410601

A few responses from previous participants

  • ‘‘My experience with the course was excellent, both content and trainers are of high quality. Trainers have a detailed and deep knowledge of each topic. I will come back for more training like this.’’ - Mallory Suarez Medina, Line Team Management CoordinatorISA Intercolombia

About DNV
DNV is the independent expert in risk management and assurance, operating in more than 100 countries. Through its broad experience and deep expertise DNV advances safety and sustainable performance, sets industry benchmarks, and inspires and invents solutions.

Whether assessing a new ship design, optimizing the performance of a wind farm, analyzing sensor data from a gas pipeline or certifying a food company’s supply chain, DNV enables its customers and their stakeholders to make critical decisions with confidence.

Driven by its purpose, to safeguard life, property, and the environment, DNV helps tackle the challenges and global transformations facing its customers and the world today and is a trusted voice for many of the world’s most successful and forward-thinking companies.

In the energy industry
DNV provides assurance to the entire energy value chain through its advisory, monitoring, verification, and certification services. As the world's leading resource of independent energy experts and technical advisors, the assurance provider helps industries and governments to navigate the many complex, interrelated transitions taking place globally and regionally, in the energy industry. DNV is committed to realizing the goals of the Paris Agreement, and supports customers to transition faster to a deeply decarbonized energy system.

Learn more at www.dnv.com.