Oil and gas

CO2PIPETRANS

During execution of the CO2PIPETRANS Phase 1, which resulted in the DNV-RP-J202, a number of significant gaps in knowledge were identified. If left unfilled these knowledge gaps will slow the implementation of CCS on an industrial scale. Phase 2 of the CO2PIPETRANS project is aimed at filling these knowledge gaps through experimental research funded by a Joint Industry Project (JIP).

The CO2PIPETRANS partners are:  

  • Arcelor Mittal
  • BP
  • DNV GL
  • Endesa
  • ENI
  • E.on Ruhrgas
  • Gassco
  • Gassnova
  • Health and Safety Executive (HSE) UK
  • Maersk Oil
  • Petrobras
  • Petroleum Safety Authority (PSA) Norway
  • Shell
  • V&M Tubes
  • Vattenfall.

This would enhance the robustness of risk management of technical and safety risks related to the whole life cycle of pipeline transmission of CO2. The life cycle of CO2 pipeline transmission consists of following stages:

JIP - CO2 pipeline lifecycle - 492pxl

Scope of CO2PIPETRANS Phase 2
The scope of work includes the following areas where further R&D is being conducted to gain an improved understanding and /or data:

  1. Dense Phase CO2 Release Modeling Validation Data
    Objective is to make available suitable information and data from experimental work to assist development and validation of robust dense phase CO2 depressurization, release, and dispersion models. Data collected during two complimentary programmes of medium scale CO2 release experiments conducted by BP and by Shell is now available. Download data set 1 (BP data), data set 2 (Shell data), data set 3 (depressurisation tests on a CO2 pipeline) and data set 4 (experimental discharge data for large diameter CO2 releases).

  2. Fracture Arrest
    Objective is to provide confirmation of theoretical models by performing full scale fracture arrest testing.

  3. Corrosion
    Objective is to determine the corrosion mechanism and the corrosion rate in dense phase CO2 for various amounts of impurities like O2, SOx, NOx and H2S.

ccs co2pipetrans