To meet the EU Ship Recycling Regulations, shipowners shall implement procedures for maintenance of IHM throughout the operational life of their vessels. However, DNV has received many questions with regards to IHM renewal surveys and how to ensure maintenance. This technical news aims to clarify what needs to be done to maintain the IHM system.
Relevant for ship owners and managers, yards, suppliers and flag states.
According to the EU Ship Recycling Regulation (EU SRR), ships above 500 GT flying the flag of a country within the EU, EEA or UK, or third-party-flagged vessels calling at European ports or anchorages, must carry on board an IHM (Inventory Hazardous Materials) certificate or Statement of Compliance, supplemented with Part I of the IHM.
The EU SRR states that IHM surveys should be harmonized with other statutory certificates, and some flag states have issued circulars for such a harmonization requirement. The deadline for the application of the EU SRR was the end of 2020, and most vessels’ initial IHM surveys were conducted in 2019/2020.
Lately, we are seeing more and more IHM renewal surveys due together with the main class renewals, and the number of support cases has increased with questions about IHM renewal surveys and IHM maintenance requirements. Below explains what needs to be done to properly maintain the IHMs and to ensure smooth port state control (PSC) inspections and IHM renewal surveys:
1. IHM maintenance procedureFirstly, shipowners must establish an IHM maintenance procedure/manual, which is integrated into the shipowner’s safety management system. In parallel, shipowners must appoint a person responsible for IHM maintenance, named an IHM Designated Person(s) (IHM DP). Based on the IHM maintenance procedure, the IHM DP shall review all purchases made for each vessel within a period as defined in the IHM maintenance procedure. This review period can be monthly, bi-monthly or quarterly, which should be defined by the shipowner and identified in the IHM maintenance procedure. For purchased products which fall into the scope of IHM Part I, Material Declaration (MD) and Supplier Declaration of Conformity (SDoC) forms must be collected from the suppliers. Even if there are no hazardous materials in a product, MD/ SDoC forms must still be collected as they are the shipowner’s evidence that the product is free of hazardous materials. The IHM Part I shall list all machinery, equipment, materials and coatings on board which are installed as fixed items. Therefore, collection of an MD/SDoC is needed for those products. For the details on the scope of IHM Part I, please refer to our topic page for IHM and ship recycling (see link under “References”). If a hazardous material is declared above the specified threshold values in a product, the IHM DP shall update the IHM and issue a new revision with date and revision number. The IHM DP should record the conducted activities in a change log.
2. IHM renewal surveysDuring the IHM renewal survey, the surveyor will verify that:
- A vessel-specific, maintained and updated IHM Part I is provided on board together with a valid compliance declaration.
- The procedure for maintaining the IHM Part I is on board and integrated into the safety management system.
- The IHM Part I is consistent with the arrangement, structure and equipment of the vessel.
3. PSC inspectionsPSC inspections are limited to verify that there is a valid IHM compliance declaration on board, which shall be considered sufficient for approval of the inspection. A detailed inspection may be carried out if a vessel doesn’t carry a valid compliance declaration or if there are clear grounds for the PSC officer to believe that
- (a) The condition of the ship or its equipment does not correspond substantially with the particulars of that certificate/SoC and/or IHM Part I.
- (b) There is no IHM maintenance procedure implemented.
- Without delay, shipowners are advised to establish and implement IHM maintenance procedures. Failing to do so might result in findings during port state controls.
- To benefit from easy and transparent IHM maintenance operations, we encourage you to explore our digital IHM Manager (IHMM) tool.
- IHM and Ship Recycling topic page
- IHM Manager (IHMM) on the Veracity marketplace
- IHM Manager (IHMM) portal page (for customers with access)
- Norwegian Maritime Authority circular on IHM certification and the use of Supplier Declaration of Conformity (SDoC) and Material Declaration (MD)
- EU Ship Recycling Regulation EC No. 1257/2013
- Hong Kong Convention on Ship Recycling SR/CONF/45
- MEPC.269(68) IHM Guidelines