Emergency Response Service (ERS™)

ERS™ drawings requirement

For the enrolment and the service thereafter the following drawings are required and used

Ships and ship shaped offshore units

1. Lines plan or offset table
2. General arrangement
3. Tank and capacity plan
4. Midship section
5. Shell expansion plan
6. Construction profile and decks
7. Fore end construction / fore peak
8. Cargo area construction
9. Engine room construction
10.   Aft end construction/aft peak
11.   Final trim and stability booklet
12.   Loading manual
13.   Loading computer test loading conditions
14.   Rudder and rudder stock
15.   Steering gear
16.   Emergency towing arrangement/booklet
17.   Damage control plan/booklet
18.   Piping Plans of ballast and fuel oil systems
19.   Docking plan drawing
20.   Container Stowage Arrangement for container carriers and vessels equipped for carriage of containers 

Semi-submersible offshore units

1. Lines plan
2. General arrangement
3. Tank and capacity plan
4. Design load plan
5. Free board plan
6. Damage control plan
7. Fire control /safety plan
8. Watertight integrity plan
9. Doors and hatches arrangement
10.   Ventilation arrangement
11.   Final stability analysis/booklet
12.   Final/latest operation manual
13.   Latest light-unit weight data
14.   Loading computer printout of one (random) loading condition
15.   Copy of one daily stability report
16.   Main structure pontoons construction overview
17.   Main structure pontoons general arrangement
18.   Main structure pontoons longitudinal sections
19.   Main Structure Pontoons Transverse Sections and Bulkheads
20.   Main structure pontoons shell expansion
21.   Main structure columns construction overview
22.   Main structure columns general arrangement
23.   Main structure columns cross sections
24.   Main structure columns shell expansion
25.   Main structure columns platforms and bulkheads
26.   Main structure deck construction overview
27.   Main structure deck box general arrangement
28.   Main structure deck box construction
29.   Main structure bracing local arrangement plan
30.   Main structure bracing construction
31.   Mooring arrangement plan
32.   Mooring system description
33.   Towing arrangement plan/system
34.   Ballast system arrangement plan
35.   Ballast system diagram (P&ID)
36.   Ballast system operation description
37.   Ballast system control and monitoring functional description
38.   Sea water cooling system
39.   Bilge system outline
40.   Bilge system operation description
41.   Draughts and Load Line marks

Jack-Up units and vessels

1. Lines plan
2. General arrangement / overall plan
3. Tank and capacity plan/layout
4. Design load plan
5. Free board plan
6. Fire control /safety plan
7. Watertight compartmentation
8. Doors and hatches arrangement
9. Hull ventilation diagram
10.   Final (afloat) stability booklet
11.   Latest lightship weight data
12.   Loading conditions report
13.   Marine operation manual
14.   Legs structure
15.   Legs arrangement
16.   Legs spud can arrangement
17.   Legs spud can structure
18.   Main hull longitudinal bulkheads
19.   Main hull transverse bulkheads
20.   Main hull transverse frames
21.   Main hull scantling elevation side shell
22.   Main deck plating
23.   Bottom plating
24.   Cantilever arrangement plan
25.   Cantilever structural drawings
26.   Deck house arrangement plan
27.   Deck house construction
28.   Jacking foundation structural plan
29.   Jacking foundation arrangement
30.   Mooring arrangement plan
31.   Towing arrangement plan
32.   Ballast system arrangement plan
33.   Ballast system diagram (P&ID)
34.   Ballast system operation description
35.   Sea chest arrangement
36.   Bilge system outline
37.   Bilge system operation description
38.   Hull marking

For special purpose ship types and for vessels with specific designs, additional drawings may be required. Contact us for details.