Risk assessments for onshore wind turbines
Onshore wind turbines may cause hazards and risks to people and therefore require a site-specific assessment, especially if located and operated in the vicinity of public areas, critical infrastructure (e.g. transport corridors, pipelines, substations, battery storage systems) or technical facilities handling hazardous materials.
Based on the objective(s) of the risk assessment, defined together with the customer, DNV carries out a thorough assessment to identify hazards, evaluate risks for vulnerable areas and groups and propose risk reduction measures.
DNV applies a structured and systematic approach for all risk assessments, specifically targeting the issue at hand. Typical events triggering a risk assessment may include blade failure, tower collapse, nacelle/rotor shedding and ice throw.
Our onshore wind turbine risk assessments include:
- Qualitative hazard identification workshops with wind turbine manufacturers and/or wind farm planners and operators
- Failure mode and effect analysis (FMEA) for manufacturers of turbines and/or specific turbine-related systems, e.g. ice detection and blade heating system
- Quantitative risk assessments with our DNV-internal software WiRA (Wind Risk Assessment) for following scenarios:
- Ice shedding and ice throw
- Blade, nacelle, rotor shedding and tower collapse
- Minimum safety distances for pipelines.
WiRA risk assessments incorporate the requirements of the following standards and guidelines:
- IEC TS 61400-31:2023 - Wind energy generation systems - Part 31: Siting risk assessment
- IEA Wind TCP Task 19 - Technical Report International Recommendations for Ice Fall and Ice Throw Risk Assessments (2nd edition)
- ISO 16708:2006 - Petroleum and natural gas industries — Pipeline transportation systems — Reliability-based limit state methods.
Contact us to learn more.
More information
DNV-RP-0175 Icing of wind turbines
This recommended practice (RP) provides principles and technical requirements for wind turbines under icing conditions – both onshore and offshore.
WICE icing loss assessment
We model site conditions using our actual insights and provide you with assessments which enable you to plan for and mitigate the effects of icing.