ALL

Our software products listed alphabetically. You may also filter the list with the left-hand menu.

3DBeam - modelling and analysis of 3D beam structures

The 3DBeam tool is used for efficient modelling and analysis of 3D beam structures.

Crankshaft Fatigue

Calculation of safety against fatigue failure in diesel engine crankshafts and safety against slippage for semi built crankshafts.

Cutres - verification of sectional forces

Cutres is an interactive postprocessor for presenting forces and stress distribution in user-defined cross sections (cuts) through previously defined FE models.

DeepC - improved confidence in deep water concepts

DeepC - improved confidence in deep water concepts. Optimum conditions for moorings, risers and marine operations

DNV Navigator™

For Captains - By Captains

DNV Navigator™ is today the market-leading software that simplifies port clearance procedures and ensures that the crew have the right information at the right time.

Emergency Response Planning

Our Emergency Response Planning Philosophy: The most critical aspects of an effective emergency response planning strategy are pre-planning and training.

Framework - fatigue and earthquake analysis

Framework is an interactive postprocessor for code checking, fatigue and earthquake analysis of frame models. All phases throughout the life cycle of the structures are covered: from initial design to re-qualification.

Gear Faceload and Rating

Calculation of contact stresses, scuffing, fatigue capacity and face load distribution in marine reduction gears.

GeniE - ingenious product modelling and analysis

GeniE is a product based on conceptual modelling and analysis of offshore structures providing a basis for life cycle product management. These techniques are proven to save cost and to increase quality.

GeniE.Lite - inGeniousEngineering

GeniE.Lite is a tool for design of regular steel structures made up of beams and plates. It is based upon the use of concepts to represent the physical structure and loads that it supports.

GeniE Wind

GeniE Wind for offshore structures - software for ultimate strength and fatigue analysis of offshore wind turbine structures

Hull Integrity

Nauticus Hull Intergrity enables ship operators to improve overall control of their fleet’s conditions by optimising inspection, repair management and hull maintenance.

HydroD

Hydrodynamic design of floating structures. HydroD has been developed to help engineers become much more productive, and at the same achieve a higher degree of quality when performing hydrodynamic analysis.

Installjac - launching and upending of jackets

Installjac - a state of the art time domain program that performs an accurate simulation of the installation process of an offshore steel-piled jacket. Both the launch and up-ending scenarios are accounted for.

Leak - calculate leak frequency

An established technical failure frequency database to calculate leak frequency in process equipment and manage your risk.

Maros

Assessing upstream asset performance with Maintainability, Availability, Reliability and Operability Simulation.

Mimosa - interactive static and dynamic mooring system analysis

A market leader in mooring analysis. Mimosa offers a variety of options such as calculation of the vessel’s wave-frequency and low-frequency motions and mooring line tensions.

Orbit Inspector - inspection task list generator

A comprehensive inspection optimisation software tool for the maintenance and operation of offshore drilling and production facilities.

Orbit Launcher - qualitative risk based inspection

A screening tool for risk based inspection. Orbit Launcher allows you to enter equipment items, specify thinning susceptibility and choose the extent of the consequences.

Orbit Offshore - quantitative risk based inspection

A comprehensive inspection optimisation software tool for the maintenance and operation of offshore drilling and production facilities.

Orbit Onshore - quantitative risk based inspection

A comprehensive inspection optimisation software tool for the maintenance and operation of onshore chemical and petrochemical facilities.

Orbit+ EAM

a comprehensive management tool to allow Asset Integrity Management, focusing on maintenance, parts, inspection and risk management.

Orbit+ IDS

a methodical inspection strategy and support tool to optimize resource usage without compromising safety and availability.

Orbit+ MMS

By providing the industrial knowledge for maintenance and failure analysis, the key performance indicators (KPIs) such as MTBF, MTTR and MTA can be monitored.

Orbit+ TEAMS

suite of integrated software and management system solutions designed to serve the needs of commercial tank terminals, by facilitating the management of all aspects of this business.

Patran-Pre - CAE modelling and FE pre-processing

Patran-Pre lets you model, develop and test a product using computer-based simulation and thereby reducing or eliminating costly prototyping and testing.

Phast

A comprehensive hazard analysis software tool for all stages of design and operation. Risks may then be reduced by re-design of the process or plant, modification to existing operational procedures, or by implementing other mitigation measures.

Phast Risk - onshore QRA software system

A user-friendly, industry standard method for carrying out Quantitative Risk Assessments (QRA) of onshore process, chemical and petrochemical facilities.

Platework - plate analysis postprocessor

Platework - an interactive program for code checking of plane stiffened steel plate structures based on results from FE analysis

Postresp - statistical response calculation

Postresp is a graphical postprocessor for statistical processing and presentation of response in frequency and time domain

Presel - superelement analysis

Presel efficiently assembles the superelements created by the Sesam preprocessors to form a complete model of a structure.

Proban - probabilistic analysis

contains state-of-the-art computational methods needed to perform sensitivity, reliability and probability distribution analysis for components and systems.

Profast - probabilistic fatigue analysis

Profast is designed for planning of cost-efficient inspection of offshore jacket structures and re-qualification of existing structures. Profast can also be used for other types of structures where fatigue crack growth is considered.

PULS - buckling checks for stiffened plate elements and shells

The buckling assessment package PULS is tailored for buckling strength evaluation of ship and offshore structures.

Riflex - non-linear structural analysis of risers and moorings

Rifles is a tailor-made and advanced tool for static and dynamic analysis of slender marine structures.

RiskSpectrum® Family - fault and event tree analysis

The RiskSpectrum® family of products enables you to successfully satisfy all your fault and event tree analysis requirements with the best system on the market.

Shaft alignment

Calculation of bearing loads, moments and stresses for shaft alignment on marine propulsion plants.

Shaft Fatigue

Dimensioning of shafting systems

Sesam Structure Integrity

Manage the structural integrity of offshore assets with Sesam Structure Integrity software, based on DNV’s in-depth knowledge of life cycle management and engineering services related to offshore structures.

Sestra - linear structural analysis

The most rapid and robust of finite-element solvers. Sestra is a general-purpose FE program for linear structural analysis.

SilverPipe

Take control from well to terminal with SilverPipe, the software that enables safe and efficient pipeline operations, documents risk, and gives a clear overview of the integrity of pipelines, components and tanks.

Simo - non-linear single body time domain motion analysis

Simulation of marine operations. Simo is a time domain simulation program for study of motions and station keeping of multibody systems.

Splice - soil and pile analysis

Splice - soil and pile structure interaction analysis for design of safe and solid foundations

Stofat - design of welded plates and shells

Fatigue design of welded plates and shells for wave fatigue loading. Avoid local structural failure due to repeated environmental loads.

Submod - refined sub-modelling

Quick and easy refined analyses - take a closer look at details and local effects. Refined sub-modelling including meshing and global displacement

Superintendent's Manual™

For Superintendents - By Superintendents

Superintendent’s Manual™ is a unique product offering best practices and up-to-date operational, technical and regulatory information to maritime players ranging from shipbuilders and training centres to professional ship managers.

Synergi Incident Management

Effective handling of real and potential events is recognised as one of the main drivers for HSEQ improvements. Systematic collecting, processing, analysis and communication of incident data together with effective action management will catalyst benefit realisation in this area. Synergi is developed with these principles in mind, and combines the most recognised principles and compliance requirements for Incident Management with the latest technological platforms to deliver a state of the art solution.

Synergi Quality Management

The Synergi™ Quality Management module will help companies identify areas for improvement, and to manage change to secure learning and growth towards sustainable shareholder, employee and customer satisfaction levels.

Synergi Audit Management

The Audit Management Module is designed to comply with international requirements and best practices within the full process of audit management. Requirements from recognised standards like the ISO 9000 and 14000 series are integrated parts of the standard module. Furthermore, the module is flexible in terms of integrating requirements from other standards and internal corporate rules and guidelines.

Synergi Activity Management

The main purpose of the Synergi™ Activity Management module is to allow organisations to manage the overall process of planning, registering and following up meetings, initiatives and activities.

Synergi Risk Management

In a global business environment, there is an increasing awareness of risk. Thus, Governance, Risk and Compliance (GRC) requirements are increasingly important for corporations looking to succeed in a globalised world. Globalisation and Stakeholders’ demands for corporate accountability and transparency require businesses to address risk quickly and demonstrate their risk performance almost real time. As a state of the art software solution, Synergi provides the features and functionality required to meet these requirements.

Synergi Environmental Management

Companies response to environmental challenges are becoming more and more important as a key factor for evaluation, understanding and public perception of their image and ability to succeed. Companies, addressing these challenges, analyzing them and understanding their potential threats and opportunities – demonstrating ability to manage, measure and communicate positive results will realize benefits in a globalised market. The Environmental Management Module in Synergi is built with local and global compliance and best practice knowledge in mind and will support this process.

Synergi Improvement Management

Any organisation which wants to survive today, needs constantly to evolve and stay ahead of changing core conditions, customer demands and stakeholder requirements. And those which can convert this need into innovation and change have the potential to grow or maintain their competitive edge.

Synergi Anonymous Incident Management

The Synergi™ Anonymous Incident Management module is designed to ensure complete confidentiality for the reporter as well as giving unnamed users access to certain parts of Synergi. One of the most common usages is a “whistleblower” reporting form, which enables anonymous reporting of misconduct, harassment and any other actions that conflict with your company’s policies and standards of behavior. Moreover, it allows users from the Internet to report customer complaints directly into your quality system.

Synergi Inspection and BBS Management

The inspection management module is designed to assist companies in improving efficiency and reaping returns from inspections and from standardised activities to review performance and working practice. By utilising features such as checklists, auto-generation of actions and automatic alerts, users will secure a standardised, transparent and effective inspection process. Moreover, they will obtain relevant documentation and be able to analyse and benchmark developments over time.